First, let me say that this is a nice looking bed. The frame is smooth and an attractive bronze sort of color. It was fairly easy to assemble - if there are two people. All the parts were there, and although the box was damaged, the contents were fine. You will want to use your own wrench on the nuts, though. The thin one they supply is pretty useless. And make sure you apply the rubber tape to the long front-to-back center support BEFORE you pop on the horizontal slats!

OK, here is the part you might want to pay attention to: The Queen size bed is EXACTLY 60 x 80 inches - the size of a Queen mattress. What that means is that there is NO space between the mattress and the footboard for tucking in your sheets, blankets, and comforter or bedspread. Furthermore, the horizontal metal mattress support slats stop about 5" from the headboard and the foot board. If you have really long sheets and blankets, that may not be a problem. But if they are not that long, you have nothing to hold them in place - the last 5" of the mattress have nothing below them to hold the sheets/blankets in place.

I solved this problem by cutting a 1x4 board to 60" and laying it across the back of the bed frame, about 1/2 inch from the foot board. I screwed it to the "mattress holders" so as not to do any damage to the frame itself (these are not structural pieces of the bed). This worked well. While the board is slightly taller than the metal supports, it is close enough. Now the blankets tuck in fine, held in place by the board, and the bed skirt goes pretty much all the way to the end of the mattress.

However, this does not solve the issue of the mattress butting up against the foot board. You just have to force the covers and comforter in between the mattress and foot board. If you look at the vendor photos, you will notice that the mattress they show on the bed is quite thin - maybe 6" or so. I used a 10" memory foam mattress, which goes all the way to the top of the foot board, and a taller one would make bedding even more difficult to tuck in.

So, here are my final thoughts. This is an attractive and well-made good quality bed, but is about an inch or so too short, and the final mattress support slats end too far from the headboard and foot board. None of that makes a huge difference, but you probably won't want to change the bedding on a regular basis, as it is difficult to get it all tucked in. Thus, I would recommend this bed for a quest bedroom, but it might be too much of a hassle for daily use and regular bedding changes. You'll need to decide that for yourself.

One last thing - the issues with this bed may be common among other beds of this type and price range, so going with a different bed may or may not make a difference.

---

After endless searching on Amazon, I bought this. It does come in a copper color however I wanted a black frame so I spray painted it. It is very sturdy! No wobble or noise.

---

I purchased this bed for our guest bedroom and absolutely love it! Really sturdy and heavier than I expected but was very easy for one person to assemble. The only negative is the foam mattress slides a little. Totally worth the price and I would recommend.

---

So, I needed a bed frame. Bed was on the floor for the longest time. I figured I'd look on Amazon because, welp, I buy everything else there! So I find this bed frame that is simple, the price is great, and it specifically states, "Sturdy" - which is important only because I didn't want noise getting in and out of bed. So I get the box and I open it up AND... one of the poles is slightly bent. #ShippingLife With a little hammer I was able to get it in place. After that, putting it together wasn't bad at all. Best part is... I was actually surprised at how sturdy it really was. When put together it doesn't have the old school wiggleness that I was a little hesitant about. It has been a great bed so far and definitely worth the price!

---

This bed frame was the perfect addition to our guest room. My favorite things worth mentioning.... 1) EASY assembly and step by step instructions with labelled components; 2) color matches the online photos well; 3) sturdy and well thought out. I would recommend this product.

---

I was thrilled when this bed arrived and I saw what it looked like. I am almost eighty so I grew up sleeping in a bed very similar to this one. According to my son in law it was very easy to assemble. Since I plan to use it in a guest room it hasn’t been slept in yet but it seems to be very sturdy. I am very satisfied with my pretty bed and best of all the price was so reasonable.

---

Great instructions, easy assembly. No need for a box spring, what a great Benifits this bed frame has - also has room for storage under the bed.

---

Very easy to put together! The crossbars/slats just drop in, no fasteners they use peg snap on units to secure them, no real need for tools other than Allen wrenches. Doesn’t make any noise while getting in or out of bed. I paired this with 12” memory foam mattress and love this set!