I ordered these on a Sunday and I swear they were at my doorstep the very next afternoon! I needed a really narrow coffee table for my family room as I'd just purchased a fairly deep leather couch. I decided to use a really cool piece of reclaimed lumber we found on the side of the road two years ago. I sanded, stained and waxed and added these 16" legs - OMG I'm in LOVE! They not only arrived fast, but were in perfect condition... came with screws and great instructions. They're well-made, sturdy... and I love the matt powder-coat finish.

---

Very happy with the quality of these. Was worried they were going to be bad quality or thin but they were perfect. Holds up a nice heavy slab of black walnut very well. Will be buying another set for other projects. *edit* I had purchased another set of these on ebay from another seller and they were crappy quality compared to these.

---

These legs are very solid/sturdy and worked out great for a coffee table that I built for my son. I took off one star because the plastic feet that come with them absolutely DO NOT stay put on the legs. I tried using some 3M double-sided mounting tape in an attempt to get them to stick, but that didn't work either -- it wouldn't adhere firmly to the slick plastic that the feet are made out of. The feet should be redesigned so that the sides wrap more around the rod that makes up the legs so that they 'snap' on and don't fall off. Each leg has 5 holes for mounting - I only used 3 of those since I felt 5 were overkill -- they're holding up a coffee table, not an elephant enclosure.

---

I bought two sets in October and one leg already broke. Only one person (my niece) has sat on the stool and she weighs about 95 pounds.

UPDATED May 28th: I would like to report that i reached out to the company and just shared my story with them. I am very happy to announce that they responded within 24 hours or so and where very concerned about my niece and her well being. They are working with me and i hope that they will be replacing any of the legs that have an issue with the welding. I would likely order from them again just because they were so responsive even after months of me ordering their product. I have currently changed the one star review to 3 and would happily give them 5 stars and continue to recommend them to friends and family if they actually follow through with replacing the defective legs with legs that will not give me a problem in such a short period of time. So far i have two people who have order multiple sets from them and they have not reported an issue.

---

I used these legs as replacements on a vintage mid century thrift credenza that had broken wood legs. After many hours of stripping a horrible paint job, these legs were the finishing touch that made this piece complete. I spray painted them a champagne gold color. A few observations -
The screws included are pretty long. We had to replace some of them with shorter ones because they were so long that it would have went through the wood at the bottom and interfered with the drawers.
The rubber bottoms to prevent scratching the floor don't stick on; the leg just sits inside the groove. A lot of the other reviews complain about that. It does make it harder to put them on - you have to lift one side at a time, just a little bit, to slide them on. You can't just put them on as you're screwing in the legs and then flip it over, because they fall off. However, I've moved the piece around a little bit, and they stay put and do a great job of protecting the floor once they're on. I can't say with certainty that they'd stay put as well if the furniture was lighter, since the weight of this piece probably does a lot to keep them on.
All in all, these are a great value and perfect for updating any piece of furniture. Highly recommend!

---

I used these legs (2 orders) to make two 10" width x 46" length x 18" high plant stands for beneath my dining room windows. These were perfect. I almost gave the product a 4-star rating because the little rubber pads that fit on the bottom of the legs do not stay in place. If you are shifting your table, bench, plant stand, etc. you will need to get down on your hands and knees and reposition the pads. First world problems, my friends.

How I made my plant benches: I went to Lowe's, asked a very nice worker to help me choose a straight 2x10 board in an 8-foot length, and had him cut two 46-inch lengths. I then drilled pilot holes in the bottoms of the boards and installed the legs. I eye-balled the whole project, honestly. $5 for the 2x10 board, 2 orders of metal legs, and I had two nice plant benches for under $45. I haven't put any finish on my wood yet, but think I'll just apply linseed oil since these are for indoor use only.

I plan to order more of these for other projects since they are so easy to use.

---

To my dismay, one of my original pin legs broke on my very expensive heavy natural wood coffee table. So I was so happy to see these were available and affordable to replace my original ones. The set came as described and includes the extra rubber feet which is a plus. I was able to remove and then replace the legs with these using my cordless drill easily and quickly! I was concerned about the top “L” shape not fitting, since the table is wood and there are cutouts where the legs screw in (not a flat surface). To my joy, they fit as described. I only needed to use 3 of the legs, they saved my table over a year ago and are holding up nicely. These would also be great to change some older furniture, make new ones with a cabinet or piece of wood on top? Definitely recommend these!

---

Very well made legs, sturdy/strong, and look great.

The floor protectors do not grip the legs or stay on them (as they appear in the picture). They are loose. I installed these legs on a coffee table that sits on a smooth wood floor. The floor protectors grip the floor. The problem with this is when you move/slide the coffee table, they come right off, because they are not snug to the bottom of the legs. If you lift the coffee table, the floor protectors actually fall off, they are so loose.

Disappointed that now I have to retrofit the feet, but for the low cost of these legs (and otherwise great quality), the feet are my only complaint.

---

We added these legs to a wide, leg-less, two-shelf cabinet and it looks way better than we expected. We now use it as a counter-height coffee centre, freeing up room on the kitchen counter. LOVE IT!

---

---

Installed on my custom entryway bench. They work great, but are guaranteed to scratch or mark any surface they are put on other than carpet. The rubber footings included help prevent this, but take away some of the overall look of the hairpin legs. Would buy again

---

Great product! Came with helpful instructions for both rectangular and round tables. Would like to purchase again for another project, however currently not available, hope to see it back again soon.

---

---

Great value, sturdy and simple. I had to use shorter screws to attach because the tabletop is only about 3/4 of an inch thick. Still feels sturdy. Perfect for a patio table.

---

These wre even better then my expectations,I ordered 2 more sets for project I will be doing later.
Totally worth the price,have seen others,not even close to the quality of these and costing much more.

I am a senior on a budget, but still want quality, and these legs have it all.!

---

---

I love the look of these legs. Purchased to put on a small piece of wood for a plant stand/side table.

---

---

Great legs apart from rubber feet which do not snap on and just fall off. Strong and well made.

---

Good quality and easy to install.
Just unfortunately slightly too short for my project. Will use for another projects in the future.

---

---

---

I made a coffee table out of barn boards
The leg caps / rug protectors do not stay on - I had to use glue them to make them stay put
You should not sit on the table